Точка доступа ENS200

The ENS200 is a long-range Wireless N150 Outdoor Client Bridge operating in the 2.4 GHz frequency band at data rates up to 150 Mbps. ENS200’s high power output of up to 400mW is ideal for high-speed wireless connection for building-to-building deployments or IP security camera wireless applications in parking lots or parking structures. 

Подробнее

Заказать:

Заказ оформлен

Ошибка отправки заказа

30 другие товары из этого раздела:

he EnGenius ENS200 is a high-speed, long-range Wireless N150 Outdoor Client Bridge that operates on the 2.4 GHz frequency band and is an ideal solution for building-to-building wireless bridging, for stable streaming of video from connected IP security cameras in parking lots or garages back to a company network, or for sending data to outdoor digital signage.

The ENS200 is compliant with the IEEE802.11 b/g/n standards delivering a wireless data rate of up to 150 Mbps. It features an internal directional 7 dBi MIMO (Multiple In/Multiple Out) antenna that coupled with its strong transmit power of up to 400mW makes the ENS200 a compelling performance solution for small and growing businesses at a very affordable price. The ENS200 can also be used in other operational modes including as an Access Point. When used as an Access Point it should be positioned in such a way, because of its more focused directional antenna signal array, to offer wireless network connectivity to a more defined outdoor venue rather than a more general outdoor area around it.

ENS200 also features a robust security feature set that includes support for WPA/WPA2 Personal and Enterprise encryption, 802.1x RADIUS authentication, hidden SSID and MAC address filtering.

The ENS202 has an IP65 rated weatherproof housing that ensures continued operation in harsh outdoor environments or in climates of extreme cold, heat or continuous moisture.

Technical Specifications 

Hardware

RF: 2.4 GHz Frequency Band

Standard: IEEE 802.11b/g. Supports Wireless N technology.

Data Rate: Up to 150 Mbps

Memory: 32MB

Flash Memory: 8MB

Antenna

Internal 8 dBi Directional Antenna with Dual Polarization

Physical Interface

2 x RJ-45 Fast Ethernet (10/100 Mbps)

1 x Reset Button

Power Requirements

 

Active Ethernet (Power-over-Ethernet)

Proprietary PoE Design
Power Adapter (United States) 24V/0.6A

Software

Operation Modes: Access Point, Client Bridge, Client Router, WDS

Wireless / Network

Auto Channel Selection
Distance Control (802.1x Ack timeout)
CLI (Command Line Interface) Supported
802.1X RADIUS Supplicant (Client Bridge Mode)
Multiple SSID (4 SSIDs), BSSID
WDS AP, WDS Bridge, WDS Station
Multicast Supported
VLAN Tagging, VLA Pass-through
Auto Reboot
Wi-Fi Scheduling

Security

 

WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
Hide SSID in beacons
MAC Address Filtering, Up to 50 field
Wireless STA (Client) connected list

 

QoS (Quality of Service)

WMM (Wireless Multimedia)

Temperature Range

Operating: -20ºC~70ºC/-4º~158ºF
Storage: -30ºC~80ºC/-22Fº~176ºF
Humidity (non-condensing)
0%~90% typical

Waterproof

IP65

 

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.

 

Package Contents

 

ENS200 Client Bridge/Access Point
Power Adapter
PoE Injector (EPE1212)
Pole Mount Set
Screw Set
Quick Start Guide
Technical Support Card

Warranty

 

1 Year



comments powered by Disqus
  • Макс_скорость 150 Мбит/с
  • Мощность 400mW
  • Стандарт 802.11b/g

На данный момент комментариев нет.